background image

warema_890374_alhb_en_v6•2022-11-01

We reserve the right to make technical modifications

8

Maintenance and cleaning

Replacing the batteries

Replace the batteries if the transmission LED lights up 

orange after the hand-held transmitter is activated. If the 

batteries are fully depleted, the hand-held transmitter can 

no longer be activated. 

 

 

In order to replace the batteries (type AAA, IEC LR03, 

"Micro"), open the battery compartment (

Fig. 3

) and 

insert the new batteries. Ensure the correct polarity: The 

plus (+) and minus (-) poles of the batteries must match 

up with the markings in the battery compartment.

 

 

Only use new batteries of the same type and always 

replace both batteries. Use high-grade batteries – 

inexpensive batteries may leak and damage the device. 

If the device is not to be used for an extended period, 

please remove the batteries. Do not use rechargeable 

batteries!

Cleaning

Clean the housing with a soft, dry cloth. Do not use 

detergents, cleaning agents, solvents, abrasive substances 

or steam cleaners!

Liability

Failure to comply with the product information in these 

instructions and any use of the device other than its 

intended use may result in the manufacturer refusing to 

honour warranty claims for product damage. In this case, 

liability for secondary harm to persons or damage to 

property will also be excluded. Observe the information 

in the operating instructions for your sun shading system. 

Liability is also excluded for damage to the sun shading 

system resulting from operation under icy conditions.

Obligations for the disposal of electrical 

devices 

A marking with this symbol indicates the following 

obligations under the scope of legal regulations:

 

 

The owner of this electrical device must dispose of it 

separately from unsorted municipal waste for further 

recycling.

 

 

Used batteries and accumulators that are not enclosed 

in the old device, as well as lamps/bulbs that can be 

removed from the old device without breaking, must be 

disposed of separately.

 

 

Distributors of electrical devices and disposal 

companies are obliged to take back the equipment free 

of charge.

 

 

The owner must take it upon themselves to delete any 

personal data contained in the electrical device prior to 

disposal.

Technical data

WMS Hand-held transmitter 

comfort

min.

typ.

max.

Unit

Supply

Battery type

2 x AAA (IEC LR03, "Micro")

Operating voltage

2.4

3.0

3.2

V DC

HF transceiver

Transmission frequency

2.40

2.48

GHz

Transmission power

10

dBm

Reception sensitivity

-95

dBm

Operating range  

(environment without 

interference)

30

m

Housing

Dimensions (L×W×H in mm)

200 × 50 × 20

Degree of protection

IP30

Safety class

III

Miscellaneous

Conformity

Specified under

www.warema.de/ce

This device complies with the EMC directives for use in 

residential and commercial areas.
WAREMA Renkhoff SE declares herewith that the radio system 

type WMS Hand-held transmitter comfort is in compliance with 

the 2014/53/EU guideline.

Ambient conditions

Operating temperature

0

50

°C

Storage temperature

0

70

°C

Humidity 

(not condensing)

10

40

85

%H

rel

Degree of soiling

2

Article numbers

WMS Hand-held transmitter 

comfort

1002767

Wall support/table stand for 

WMS Hand-held transmitter 

comfort

1002768

WAREMA Renkhoff SE

Hans-Wilhelm-Renkhoff-Str. 2

97828 Marktheidenfeld

Germany

Summary of Contents for WMS Hand-held transmitter comfort









Reviews: