warema_890374_alhb_en_v6•2022-11-01
We reserve the right to make technical modifications
2
Operating elements and displays
Fig. 2 Operating panel of the WMS Hand-held transmitter comfort
Pos. Function
Result
Front
A
Control button
Switching the comfort control functions on or off.
Product buttons
Select the product type, or switch between product channels.
The currently selected product type flashes.
Info button
Information displays on the currently selected product channel.
Every press on changes to the next mode:
1. Allocation of channel and receivers (display only)
2. Sun control
3. Dawn/dusk control
4. Precipitation monitoring
5. Wind monitoring
6. Leave the info mode.
Move commands cannot be sent while the info mode is active ( lights up).
Control display
If a control function was the reason for the last movement, the corresponding symbol
lights up for 2 s when you operate the product the next time.
The LEDs below the symbols show the current state of the control modes.
5
Special function display
Control mode, Learn mode active, Store button, Info mode
6
Transmission LED
flashes green
= The WMS Hand-held transmitter comfort is
transmitting
flashes red
= The WMS Hand-held transmitter comfort has not
received a response from the receiver
flashes orange:
= Change the batteries
Number display
The number display block indicates a variety of information that depends on the
state of the hand-held transmitter.
upper row of LEDs:
scanned receivers or parameter values
numbers:
channel numbers, parameter levels
lower row of LEDs:
active channel
Scenario button
Save and call up scenarios
Buttons
Send move or switch commands to the selected receiver.
Comfort button
Save and recall comfort positions
Back
Batteries
The hand-held transmitter requires two AAA batteries (IEC LR03, "Micro")
Learn button
Activates or ends learn mode
Fig. 3 Back of the WMS Hand-held transmitter comfort
