3
816818_g•en•2017-12-01
We reserve the right to carry out improvements
Learning channel 3 into external venetian blind 1
Place receiver 1 into
learn mode:
Select chan-
nel 1, press and hold the
learn button, external vene-
tian blind 1 waves once,
release the button.
Learn channel 3 as an
auxiliary channel: Select
channel 3.
Press and
hold the learn button,
external venetian blind 1
waves once, release the
button. Channel 3 is now
an auxiliary channel for
external venetian blind 1.
End the learn mode:
Se-
lect channel 1 and press
the "Up" or "Down" button.
Aesult:
External venetian blind 1 now can also be oper-
ated with channel 3.
Learning channel 3 into external venetian blind 2
Place receiver 2 into
learn mode:
Select chan-
nel 2, press and hold the
learn button, external vene-
tian blind 2 waves once,
release the button.
Learn channel 3 as an
auxiliary channel: Select
channel 3, press and
hold the learn button,
external venetian blind 2
waves once, release the
button.
Channel 3 is now
an auxiliary channel for
external venetian blind 2.
End the learn mode:
Se-
lect channel 2 and press
the "Up" or "Down" button.
Aesult:
External venetian blind 2 now can also be oper-
ated with channel 3.
1
Ι
3
Ι
1
Ι
2
Ι
3
Ι
2
Ι
Delete auxiliary channel
You can delete all auxiliary channels learned into the
receiver if you have committed an error and you want to
start over again. Note the following example:
1
1
2
Ι
Ι
Ι
2
3
1
2
= Master channel
= Auxiliary channel
Fig. 3
Auxiliary channels in receiver 1 and 2 are to be deleted.
Carry out the following operation steps consecutively
with the respective master channel:
Delete all auxiliary chan-
nels in receiver 1:
Select
master channel 1, push
the learn button and hold
it for at least 20 seconds
until the external venetian
blind no longer carries out
any movement!
End the procedure:
Se-
lect channel 1 and press
the "Up" or "Down" button.
Delete all auxiliary chan-
nels in receiver 2:
Select
channel 2, push the learn
button and hold it for at
least 20 seconds until the
external venetian blind
no longer carries out any
movement!
End the procedure:
Se-
lect master channel 2 and
push the "Up" or "Down"
button.
Aesult:
All auxiliary channels in receiver 1 and receiver 2
were deleted.
ITICE
R
Only one master channel and 15 auxiliary
channels can be learned into each receiver.
The master channel cannot be deleted but only
be overwritten with a new channel. The auxiliary
channels are not deleted when you learn in a
new master channel. The weather station can
be learned in as an auxiliary channel.
1
Ι
1
Ι
2
Ι
2
Ι