13
890202_b•en•16.11.2011
We reserve the right to carry out improvements
Installation
1 2
1 = white
2 = black
Fig. 4: Connecting the dusk/dawn sensor
•
If you are using the dawn/dusk sensor, connect this to
the rear of the WAREMA Comfort Timer control panel. Ob-
serve the colours on the connection cable. If the wire are
connected incorrectly, the brightness evaluation function will
not work. Insert the connecting cable around the strain relief
through the relevant hole in the enclosure. The connecting
cable can be extended by up to 10 m.
•
Fasten the dusk/dawn sensor to the window pane. The glass
surface must be clean and free of grease.
•
Then fit the control panel onto the power unit. When you have
connected the dusk/dawn sensor, ensure tha the connecting
cable is not trapped!
