WAREMA BACnet 4M230.8I AP, Installation Instructions

Page: 3 / 4

3
warema_2051514_alhb_en_v2•2022-07-01 We reserve the right to make technical modifications
Technical data
BACnet 4M230.8I AP min. typ. max. Unit
Operating voltage 198 230 253 V AC
Mains frequency 50 50 60 Hz
Power consumption in standby
mode at 230 V AC
0.7 - 2.3 W
Output per drive*
Switching capacity 230 V AC/
cos φ = 0.6
500 VA
*The total power per fuse must not exceed 1000 VA.
BACnet interface
Protocol BACnet MS/TP
Address range for BACnet 0 - 255 (0x00 to 0xFF)
Bus interface RS485 (two-wire bus) with
potential equalisation in bus/
line topology, terminate with
120 Ω (
see Fig. 5, terminal
X11 ) and activate BIAS resis-
tors in the router.
Transmission format 8 N 1
BACnet device profile
BACnet Application Specific Controller (B-ASC)
BACnet MS/TP in accordance with ISO 16484-5:2017
BACnet Protocol Revision 16
Inputs, local operating elements
Current, active 0.5 1 1.5 mA
Ambient conditions
Operating temperature 0 50 °C
Storage temperature 0 70 °C
Humidity
(not condensing)
10 40 85
%F
rel
Degree of soiling 2
Connection
Connecting line Spring terminal U/Contact
Permissible line cross-section max. 2.5 mm²
Stripping length min. 8 mm
Motor outputs Spring terminals
Permissible line cross-section max. 2.5 mm²
Stripping length min. 8 mm
Inputs Spring terminals
Permissible line cross-section max. 2.5 mm²
Stripping length min. 8 mm
BACnet interface Spring terminals
Permissible line cross-section
0.6 - 0.8 mm
∅
Stripping length 5 - 6 mm
Housing
Dimensions See Fig. 4
Surface-mounted housing
degree of protection
IP30
Safety class
(PE is looped through)
I
Miscellaneous
Conformity
Specified under
www.warema.de/ce
This device complies with the EMC directives for use in
residential and commercial areas.
Article numbers
BACnet 4M230.8I AP
2047065
Strain relief set
for surface-mounted hous-
ing
1002236
WAREMA Renkhoff SE
Hans-Wilhelm-Renkhoff-Strasse 2
97828 Marktheidenfeld
Germany
Fuse protection
BACnet 4M230.8I AP Quan-
tity
Fuse protection
BACnet 4M230.8I AP 1 x 6.3 AT H
3 ‒ 4 mm
158 mm
119 mm
132 mm
180 mm
60 mm
Fig. 4 Surface-mounted housing dimensions