Assembly - Hanging the Fan(continued)
1
Making the electrical connections
WARNING:
Each wire not supplied with this fan is designed to accept
A
up to one 12-gauge house wire and two wires from the fan . If you have
� larger than 12-gauge house wiring or more than one house wire to connect
to the fan wiring,consult an electrician for the proper size wire nuts to use.
0
IMPORT ANT:
Use the plastic wire connectors(BB) supplied with your
fan. Secure the connectors with electrical tape and ensure there are no
loose strands or connections.
,Ii\
WARNING:
Remove the rubber motor stops on the bottom of fan before
� installing the blades or testing the motor.
NOTE:
The fan comes with 54 in. Lead wires for use with an
extended ball/down rod assembly. If using the 4.5 in.ball/down rod
assembly(B) provided, youcan cut the lead wires to your desired
length(no shorter than 12 in.).
-----1
BLACK t---7--CJ----I
AC I N
<
L
> ----
._ __ �BLU Et----
mj
---WHITE---
,
----11
AC IN <N>i,-1
---
------------iG
REENf-----r7----1I
Ground wire
1 :The motor "green" wire to the "Ground wire"wire from outside Outlet Box.
2:The motor "white" wire to the "AC IN<N>"wire from outside Outlet Box.
3:The motor "black" wire and "blue" wire to the "AC IN<L>"wire from
outside Outlet Box.
4:Finally, put the connected wires in the hanger.
<Hand Pull Chain ONLY>
Assembly - Hanging the Fan(continued)
Preparing for mounting
A
t
j
\
)
\__
/
�
�
_II
-C
1 :Remove the mounting bracket from the canopy by
loosening the two canopy screws located in the L shaped slots.
2:Remove and save the two canopy screws in the round holes.
This will enable you to remove the mounting bracket
[ill
