Table of Contents
Safety Information
2
Hanging the Fan
6
Pre-Installation
3
Attaching the Fan Blades
7
HARDWARE INCLUDED
4
Attaching the Lights
8
Ceiling
5
Install the crystal shade
9
Use of remote control
Care and cleaning
Safety Information
1, To reduce the risk or electric shock the electricity has
been turned off at the circuit breaker or fuse box before
begin.
2, All wiring must be in accordance with the National Electrical
Code NASVNFPA 70-1999 and local electrical codes.
Electrical installion should be performed by a qualified
licensed electrician .
3, Tne outlet box and support structure must be securely
mounted and capable of reliably supporting 35 ibs. (15.9
kg). Use only UL Listed outlet boxes marked "Acceptable
for Fan Support of 35 ibs. (15.9 kg) or less."
4, The fan must be mounted with a minimum of 7 ft. (2m)
clearance from the trailing edge of the blades to the floor.
5, Do not operate the reversing switch while the fan blades
are in motion. You must turn the fan off and stop the
blades before you reverse the blade direction.
6, Do not place objects in the path of the blades.
7, To avoid personal injury or damage to the fan and other
items.use caution when working around or cleaning the
fan.
8, Electrical diagrams are for reference only. Light kits that
are not packed with the fan must be UL-listed and marked
suitable for use with the model fan you are installing.
Switches must be UL General Use Switches. Refer to the
instructions packaged with the light kits and switches for
proper assembly.
9, After making electrical connections, spliced conductors
should be turned upward and pushed carefully up into
tne outlet box.The wires should be spread apart with the
grounded conductor and the equipment-grounding
conductor on one side of the outlet box.
10, All setscrews must be checked and retightened where
necessary before installation.
10
11
WARNING:TO
reduce the risk of personal injury,
do not bend the blade brackets (also referred to as
flanges) during assembly or after installation.Do not
insert objects in the path of the blades .
WARNING:
Remove the rubber motor stops on
the bottom of the fan before installing the blades
or testing the motor.
WARNING:
To reduce the risk or fire or electric
shock,do not use this fan with any solid-state
speed control device.
WARNING:To
avoid possible electrical shock,
turn the electricity off at the main fuse box before
wiring.It you feel you do not have enough electrical
wiring knowledge or experience, contact a licensed
electrician.
WARNING:
Electrical diagrams are for reference
only. Optional use of any light kit shall be UL-listed
and marked suitable for use with this fan.
WARNING:
To reduce the risk of fire, electric shock,
or personal injury. mount to outlet box marked"
Acceptable for fan support of 35 ibs.(15.9 kg)or
less." and use the screws provided with the outlet
box.
