Side Panel x2
#900456
Plastic Tray #900479
Ramp
#901347
Roof Panel #900477
Bolts x8
and
Hex Wrench
#900457
Food Bowl
#900469
Front Panel #900475
Back Panel #900476
Floor Grate #902556
Shelf
#900493
Wheels x4
#900492
Step 3
Attach the Roof Panel by sliding
the right rear lower wire extension
under the support tabs and into the
hole on the Side Panel.
Slide the rest of the lower wire
extension under the open tabs
and into the hole in the left
Side Panel.
Step 2
Attach side panel with 4
more hex Bolts and
tighten all.
4 Hex Bolts
Step 1
Insert a non-locking Wheel into the Right Side Panel so
the holes line up, then insert Bolt. Align the hole in the
bottom of the Back Panel with the hole in the Side
Panel that you just placed the Bolt through. Using the
Hex Wrench, screw in the Bolt through the Side Panel
and into the Back Panel; repeat for the opposite Side
Panel making sure the tabs face towards the outside
and the tracks face towards the inside of the cage.
Attach the Front Panel in the same way, using the
locking Wheels and making sure the door opens out.
TIP: Do not tighten bolts fully until all panels are
in place.
Tracks
facing in
®
living room series
rabbit and guinea pig home
assembly instructions
item #01930
