4.
Line up the Suspension Bracket with the two sleeves, hook facing the back of panel where rebate is.
Screw to secure.
5.
Turn panel over, and screw the other 2 screws into holes.
These meet with the thread in the sleeves to securely fit the Suspension Bracket to the panel.
6.
Lay out your vertical panels and fit Cam Pins.
Refer to
Diagram A
for shelf positions.
7.
For the ‘Lily’ and the ‘Princess’ systems, you will need to use a double-ended Cam Pin for the section where two
shelves are at the same height (as shown).
Summary of Contents for Maxi Wall Hung Series
Page 5: ...Diagram A...
