Assembly Manual for T-34A/B
Copyright 2008 Thomas A. Jacoby and WarbirdKits.com
6
Notch the wing leading edge for a 1/8 dowel.
Sand the wing leading edge to shape.
Repeat these steps for the right-hand panel.
Glue the wing panels together. Reinforce the join with
1/2" fiberglass tape and epoxy.
Install the 1/8” dowel in the leading edge. The dowel
should
project about 1/4” forward of the wing.
Glue the wingtip parts WT together
– two for each side.
Glue the wingtips to the wings, then sand them to
shape.
Cover the wing as desired.
