Wansview NCZ-550W, Operation Manual, Page: 16 / 22

http://www.wansview.com
16
Fig. 12
 Tick “Enable alarm” to active alarm function

Setting alarm detection mode:

Tick DIDO input(External sensor input)
：
if tick DIDO input, need to connect
external sensor at alarm input port, otherwise the function is inefficient;

Tick moving detection
：
It will trigger the alarm when it detects any motion.
Sensitivity value 0 means disable moving detection;
Sensitivity value 1 means lowest sensitivity;
Sensitivity value 10 means highest sensitivity;

During setting time, you can appoint alarm action:

DIDO output(Linkage alarm system output)
：
Enable the function, to connect
alarm system to alarm out port, alarm time is 30 seconds;

Video recording
：
Enable the function, to insert SD card, and ensure the SD
card works OK, you can set record time and video cache here;

Image capture
：
You can set capture size, capture quality, image number and
image cache here.

FTP transfer
：
enable the function, to set FTP server correctly, it will send
two pictures to FTP server each alarm;

Send mail
：
Enable the function, to set E-mail correctly, it will send two
pictures to E-mail each alarm.