Wanroy WY51100, User Manual

Page: 6 / 24

WY51100
6
Do not use water or detergent to clean the internal and external electrical components
of the cabinet.
Do not stand, lean or sit on the device.
Do not damage any parts of this device.
The personnel responsible for installation and maintenance must be strictly trained to
understand all safety precautions and master the correct method of operation.
Only qualified professionals or trained personnel are allowed to install, operate, and
maintain the device.
The personnel who operate the equipment, including the operators, trained personnel,
and professionals, must meet the requirements of the local country
S
pecial operation
qualifications, such as high pressure operation, high altitude operation and special
equipment operation qualifications.
The replacement of this device or component (including software) must be performed
by a professional or authorized person.
2.3 Personnel Requirements
All electrical connections must meet the electrical standards of the country in which the
project is located.
Cables prepared by users must comply with local laws and regulations.
Special insulation tools should be used for high-pressure operations.
Before connecting the power cable, ensure that the label on the power cable is correct.
After the device is completely powered off, it is only allowed to operate the device
within five
minutes.
When the cable is used in a high temperature environment, the insulation layer of the cable
may age or be damaged. Therefore, the distance between the cable and the heat source
must be at least 30mm.
Cables of the same type should be bundled together. However, different types of cables
should be kept at least 30mm apart and should not be wound together or used across.
2.4 Electrical Safety
2.4.1 General Requirements
Before electrical connection, ensure that the equipment is not damaged,
otherwise it may cause electric shock or fire.
Do not install or remove any power cables while the power is on. The
contact between the power cable and the conductor may generate
electric arcs or sparks, which may cause fire or personal injury.
2.4.2 Grounding Requirements
Before installing the device to be grounded, install the grounding cable. When removing the
device, remove the protection ground cable at the end.