Wanroy WY51100, User Manual

Page: 20 / 24

WY51100
20
8.3 Storage and Maintenance of Batteries
8.3.1 Battery Storage Requirements
Do not put the battery in the fire. The battery may explode.
Do not open or damage the battery. The electrolyte flowing from the
battery is harmful to the skin and eyes. Electrolytes can also be toxic;
1. When the battery is stored, it should be placed correctly according to the markings
on the box. Do not lie upside down or on your side.
2. When stacking battery boxes, it should meet the stacking requirements on the outer
packaging.
3. The battery should be handled carefully, and it is strictly forbidden to cause any
damage to the battery.
5. When storing, disconnect the battery from the outside. If there is an indicator on the
battery faceplate, the indicator should be off.
6. The warehouse manager will make statistics on the battery inventory every month and
notify the planning department regularly. If any battery has been stored for nearly 15 months
(-10°C to 25°C), 9 months (25°C to 35°C) or 6 months (35°C to 55°C), charging should be
arranged in time.
7. When delivering the battery, the first-in-first-out principle should be followed.
8. After battery production and testing, it should be charged to at least 50% SOC before
storage. If this device is not used for a long time, please discharge the battery to 45% to 60%
of the battery capacity and disconnect the battery output to avoid battery drainage.
4. Storage Environment Requirements:
Ambient temperature: - 10°C to 55°C, recommended storage temperature: 20°C to 30°C.
Relative humidity: 5%RH-80%RH.
Dry, well ventilated and clean.
Should be kept away from corrosive organic solvents, gases and other substances.
Direct sunlight should be avoided.
Stay two meters or more away from the heat source.
9. Do not touch the battery pack with wet hands.
10. Do not crush, thro
W
or puncture the battery.
11. Always dispose of batteries in accordance with local safety regulations.
12. The battery should be stored and charged in accordance with this user manual.
13. When storing or transporting batteries, do not reverse the polarity of the batteries,
do not stack batteries
W
ithout protective packaging, and do not stack more batteries than
specified on the packaging.
14. All operators of energy storage systems should comply
W
ith user manuals,
installation and maintenance manuals, and quality assurance requirements.
Equipment damage caused by neglect or misreading of user manuals, installation and service
manuals, and quality assurance requirements will not be eligible for product warranty.