Tripod BO-DSN10
www.wano.pl
7
"INC" key:
It functions as the
+1 key
when scrolling up to select system menus and set parameters.
"DEC" key:
It functions as the
-1 key
when scrolling down to select system menus and set parameters.
NOTE:
In the system menu and menu setting interface, if there is no key operation within 5 seconds, the
system will automatically exit the menu and return to the standby interface.
4.2. Menu setting
For example, to change the passage time of the gate to 3 seconds, follow these steps:
Step 1:
Long press
the "
MENU
" key to enter the system menu. Use the "
INC
" and "
DEC
" keys to scroll up and
down and select the "
F 0 1
" menu (menu description below).
Step 2:
Press the "
MENU
" key to enter the passage time setting interface.
Step 3:
Use the "
INC
" and "
DEC
" keys to increase or decrease the parameter value and set it to number 3.
Step 4:
After completing the setting, press the "
MENU
" key to save.
Step 5:
Exit the menu: Scroll the menu to the "
F11
" menu and press the "
MENU
" key to manually exit the
menu. Or if there is no key operation for 5 seconds, it will automatically exit the menu.
4.3. Parameter setting instruction
After the control board is powered on, the LED screen displays
<Run>
System menu description:
1.
"F01"
Set the passage time of the gate. If no one passes within the set time, the gate will automatically close.
(Default is 5 seconds)
2.
"F02"
Gate constant opening function and whether to count when in constant opening mode.
0:
Constant opening function is off.
1:
When in constant opening mode, only count the number of people passing on the left.
2
or
3:
When in constant opening mode, count the number of people passing on both the left and right sides.
(Default is 3, counting on both sides in constant opening mode)
3.
"F03"
Gate working mode.
0:
Free passage (not commonly used. If you want free passage, it’s usually more
convenient to directly bind the electromagnet without powering on)
1:
Power-off arms drop down (Default is
1, power-off arms drop down)
4.
"F04"
Memory function. 0: Turn off the memory function. 1: Turn on the memory function.
After turning on the memory function, multiple cards can be swiped at once to allow multiple people to pass.
