12
AFTER SALES SUPPORT
86-571-63379578
6.2
In the Slicing process you can see the printing time
and other information about the model. You can also slide
the slider to up and down and see the layers of the model
you are going to print.
Slicer starts to write and save the file.
7.1
Copy the sliced zip file into USB disk.
Insert the disk into the printer.
Click on Export and save the file as a Zip file.
7.
Insert the USB and PRINT
7.2
Click USB PRINT. Select the file you
wish to print. It would take few seconds to
unzip the file.
Note:
Unzip the file would take some memory
inside the disk. Please always leave some
space for unzip.
