AFTER SALES SUPPORT
86-571-63379578
15
5.9
To pour the resin into the tank, you need to lift the printing platform.
Press the icon for several times and give a good distance between the
cylinder and the plate. Shake the bottle before opening it, then pour the
resin into the jar as shown in the picture above.
5.8
Pouring resin
5.6
You need to lift the printing platform
.
Install the VAT onto the printer. Make
sure the 2 locking screw well secure the VAT from moving up and down.
5.7
You need to lift the printing platform
.
Install the VAT onto the printer. Make
sure the 2 locking screw well secure the VAT from moving up and down.