- 27 -
Radiator Maintenance
Suggestion Cooled liquid Type: anti-freeze liquid
It
’
s only using no rust no freeze liquid for this engine
。
Inspecting
Open the bolt, take the cover off, you can see the liquid lever is
staying1/5
，
if less than1/5
，
please immit it.
Immiting the Cooled liquid
Ÿ
Open the gas of the radiator 1. if the cooled liquid is not full,
please keep it full. Then cover it.
Ÿ
if you want to add more cooled liquid, starter the engine
liquid rising 80
℃，
waiting for 5minuts thenopen the cover
again1
，
till the liquid full, close the cover.
Ÿ
Following the above number, you can add the liquid
for three times.
Ÿ
Or you can open the cover 2 to immit the liquid after the
engine is cooled.
Warning
：
When the engine is high temperature, not open the cover, in
case the liquid burst out to injury the body.
1
Fig 30
2
Fig31
- 28 -
Ⅶ
.
Vehicle identification
Vehicle model, VIN and engine number of the motorcycle
（
Fig32
）
When the motorcyle are registered or getting the license from the transport department, the
owner should be send the VIN number and engine number
。
The maintain people change
the parts, need the numbers too.
。
The products brand should be added at the right side plate of the main stand
（
see page 5
）
Fig32
