10
Safety notes
Mains cable
Only connect to an earthed socket outlet.
Power failure
In the event of a power failure, if the OsseoSet
TM
200 is switched off, or when alternating between programs, the last
values set are saved and re-activated on power-up.
System failure
A total system failure of the OsseoSet
TM
200 does not constitute a critical fault.
Intermittent operating mode S3 (4min/10min)
When there is a current consumption of max. 0.8 A for SI-923 and 1.6 A for SI-915 (with pump switched on),
the permissible relative load time is 4 minutes to 10 minutes pause time.
