WANDERS Onyx Series, User Manual And Installation Manual

Page: 18 / 84

18
GB
General
It is common practice for the dealer where you purchased your gas fi replace to take also care of installing it and connecting it
to the gas mains. If this is not the case, please ensure that the installation is done by a certifi ed installer. Connecting gas devices
by unqualifi ed persons is prohibited, in which case we cannot give any guarantee that your gas appliance is functioning
properly.
Location of controls and receiver
To get to the controls and the receiver, please complete the following steps:
•
Slide the top plate up enough so as to clear the front plate (when doing so, mind
the fi nish on the fl ue pipe!).
• Lift up the front plate, which is hooked onto the structure (when doing so, mind
the weight of the plate!).
• Carefully put the front plate off to the side.
• The receiver has a protective hood to shield it from the heat.
Here, you will fi nd the gas control unit (Mertik GV60-M1 C5D3KL) and the receiver
(Mertik GB60-R4AU).
Setting the controls
For setting the remote and other information regarding the controls, please consult page 63 and up.
Adapter
The receiver can be equipped with an adapter (art.nr. INK3270), which then eliminates the need for batteries in the receiver. In
the event of a power outage, you can add said batteries in order to still be able to operate the fi replace.
Gas-saving system
Your fi replace is programmed to save on gas when it is not being used. For more information, please consult page 75.
Malfunctions
For a diagram of potential malfunctions, please consult page 78.
Manual controls
The fi replace can be lit and operated manually in the event of a power outage. For more information, please consult page 74.
GV60-R4AU