WANDERS DANTA 1100, Installation, Servicing And User Instructions Manual

Page: 3 / 36

installation, servicing and user instructions manual | GB + IE
3
© Copyright 2014 Wanders res & stoves
The information contained herein is subject to change without notice. Wanders res & stoves shall not be liable for technical or editorial errors or omissions contained herein.
1. General Notes 4
2. User instructions 5
Operation (remote control with EcoWave) 5
Operation (optional Wanders EcoWave app) 5
2.1 First Time of Operation 5
2.2 Remote Control Overview 5
2.3 Batteries 6
2.4 Replacing the batteries 6
2.5 Setting the Transmitter code 6
2.6 To Ignite the appliance 6
2.7 To Turn the appliance OFF 7
2.8 Adjusting the Flame setting 7
2.9 Using the "Effect" Burner 7
2.10 Setting °C/24 hour or °F/12 hour clock 7
2.11 Setting the Time 7
2.12 Cleaning and Maintenance 7
3. Installation instructions 8
3.1 Gas Connection 8
3.2 Ventilation 8
3.3 Appliance Fireplace Installation 8
3.3.1 Building the Fireplace 8
3.3.2 Built-In Fireplace Sizing (assuming a Cement Board Lining is used) 9
3.3.4 Mantel Clearances 11
3.4 Flue Connection 13
3.4.1 General notes 13
3.4.2 Timber Frame Construction 13
3.4.3 Carport or Building Extension 13
3.4.4 Basements, Lightwells and Retaining walls 13
3.4.5 Terminal Locations 14
3.4.6 Horizontal Wall Vent Termination type C11 15
3.4.7 Vertical Roof Vent Termination C31 16
3.4.8 Typical Installations Roof Vent Termination C31 20
3.5 Fuel Bed Media and Arrangements 21
3.5.1 Danta 500 22
3.5.2 Danta 800 22
3.5.3 Danta 1100 23
3.5.4 Danta 1400 & Koto 24
3.5.5 Pebbles 25
3.5.6 Stones 25
3.6 Commissioning the Appliance 26
3.6.1 Pilot Ignition Check 26
3.6.2 Main Burner Check 26
3.6.3 Pressure Check 26
4. Servicing 27
4.1 Cleaning the Ceramics 27
4.2 Servicing the Burners 27
4.3 Spare parts 28
4.4 Flue pipes 28
5. Technical Information 29
5.1 Countries of Use 29
5.2 Technical Data 30
5.2.1 Danta 500 30
5.2.2 Danta 800 30
5.2.3 Danta 1100 & Koto 31
5.2.4 Danta 1400 31
6. Electric wiring 32