Wanderer
Astro
4
Figure2
After completing the settings, you can click Open and Close to control the cover
and set the brightness of the flat panel.
Pay attention:
1. Stalling is strictly prohibited. During the setup process, be sure to control the
movement of the cover by small amounts. There is a small probability that the motor
gearbox will be damaged if the rotor stalls for many times.
2. After installing the WandererCover V3 on a new telescope, be sure to reset the
open and closed positions.
3. If WandererCover V3 is powered off accidentally during the movement, the open
and closed positions must be reset.
