Wamsler 198 54, User Instruction

Page: 22 / 84

22
1.2 Installation
Fuels
Low smoke, trouble-free operation of the stove and a supply of heat at the nominal
level with a chimney draught of 11 Pa are only guaranteed when you use the following
fuels and no others.
Only use natural, dry chopped firewood with a remaining humidity of max. 20%.
Types of fuels
Heating value appr.
kJ/kg
Hard wood
Soft wood 15.900
11.500
With the primary air damper, do you adjust the rated output.
There may be engaged in only the settings and fuel quantities are
given that correspond to your licensed or purchased device.
Adjustment:
Setting of the primary
air regulator Fuel
6,5 kW
Burning time
Warning up,
kindling
A -
Wood
Nominal heating
performance
H ca. 0,75 h
Putting out of working
order
H -
Table 2
Filling quantities 6,5 kW
-Split billet: max. length: 25-28 cm, max. 2 billets per filling, appr. 1,8 kg
IT IS NOT ALLOWED to burn waste, fine chipping, bark, wood handled with preven-
tive chemicals, furthermore paper and cardboard. For kindling please use wood scrap-
ings or grill starter but never use liquid auxiliaries!
The first kindling
•
At the first fire set-up could be a little smoke, but is not dangerous, normal!
In this time, please ventilate the room carefully!
Warning! Upon the first kindling, smoke and unpleasant smell may be gener-
ated. Always ensure the proper ventilation of the room (by opening windows
and doors), and heat the fireplace at maximum rated heating performance. If
with the first heating the maximum temperature is not reached, the above-
mentioned effects may as well arise later on.