WWW.
WAMBAM
FENCE.COM
10
ASSEMBLY
INSTRUCTIONS
VF13002
STEP 6:
INSTALL
POST CAPS
STEP 6.1
1.
Put a small bead of vinyl glue or weld (purchased separately at a hardware store)
along the inside of the Post Cap
(A)
.
2.
Place the glued post cap on the post and allow it to set for 5-10 minutes.
Vinyl
We
ld
A
1
2
Most yards are relatively level and will allow for a fairly simple installation. If your yard is steeply
pitched, or is very uneven, you may need to stair-step your panels as illustrated below. Post height can
be trimmed down as necessary.
Ground