WWW.
WAMBAM
FENCE.COM
6
ASSEMBLY
INSTRUCTIONS
SB61000
STEP 2:
INSTALL
SURFACE MOUNT
Note
: If you are installing over a wood
deck, it is best to secure a 2x6 piece
of wood between the joists where the
mount will be installed.
STEP 2.1
STEP 2.2
A
B
Concrete
: Use a hammer drill to drill holes through the
pre-drilled holes in the Surface Mount
(A)
. Use (4) 3/8” x 3”
long concrete wedge anchors (not included) to secure the
surface mount.
Wood
: Drill holes through the pre-drilled holes in the
Surface Mount
(A)
. Use (4) 3/8” x 4” long wood bolts (not
included) to secure the surface mount.
Slide the leveling
donuts to a posi-
tion where they are
vertically level and
secure them with
(4) 1/2” Hex Head
Tek Screws
(B)
.
Note
: The donut can be
adjusted to compensate
for a slightly crooked pipe
anchor. Slide the donut
either left or right to create
a level plane between the
anchor positioner and the
donut.
