WamBam Plain Jane Vinyl Gate Manual Download Page 28

Page: 28 / 29

16in

For installation videos and more information, visit www.wambamfence.com

Options for Gate Installation

with Space Restriction

OPTION 1

Short Panel Installed to Support

Hinge Post Only

OPTION 2

Add Concrete After Gate Installation

A - After your gate and hardware is installed,

temporarily block up the far end of the gate.

This will relieve pressure on the pipe anchor.

B - Dig a 16” diameter hole approximately 12”

to 18” down lower than the gate stabilizer.

C - Add one or two bags of concrete.

D - Remove the temporary gate block after

concrete cures and back-fill to level grade.

A - If a small panel of fence (as illustrated), can be

installed to support the hinge post only, that is the ideal.

Ground

12-18in

CONCRETE

Concrete

Temporary wood block

Your gate style may not be as illustrated.

Summary of Contents for Plain Jane Vinyl Gate






























Search results

Summary of Contents for Plain Jane Vinyl Gate

Reviews:

Related manuals for Plain Jane Vinyl Gate

Brands by name

Popular brands

WamBam Plain Jane Vinyl Gate, Manual

Search results

Summary of Contents for Plain Jane Vinyl Gate

Reviews:

Related manuals for Plain Jane Vinyl Gate

Brands by name

Popular brands