For installation videos and more information, visit www.wambamfence.com
12
A
A - Using a 1/8” drill bit, pre-drill the holes for hinge screws as illustrated.
Angle your drill slightly as illustrated.
B
TOP VIEW
ANGLE your drill to
pierce into angled portion
of post as illustrated.
D
C
B - Fasten three, 2” screws through
the drilled holes. Repeat steps ‘A’
and ‘B’ for second (bottom) hinge.
C - Swing the gate open and pre-drill
four more holes for hinge screws as
illustrated.
D - Fasten four, 2” screws through
the drilled holes. Repeat steps ‘C’ and
‘D’ for second (bottom) hinge.
How to Position Screws on the Post Side of the Hinge
Plain Jane Vinyl Gate
