WamBam PEEPING TOM VF16200 Assembly Instructions Manual Download Page 19

Page: 19 / 21

WWW.

WAMBAM

FENCE.COM

ASSEMBLY

INSTRUCTIONS

VF16200

Repeat in the remaining corners using (3)

total 3½” self-drilling stainless steel screws.

STEP 9.2

Note:

Drive the screws

into the upper third of

the bottom rail to ensure

the screws go through

the pickets.

STEP 10:

GLUE

POST CAPS ONTO POSTS

STEP 10.1

STEP 10.2

Put a small bead of Vinyl Glue

(G)

along the

inside of the post cap.

Vinyl

Note:

Gluing your post caps permanently in place

is optional but recommended.

Cap’n Jack Cap’n America Cap’n Morgan

Place the glued post caps on the posts and

allow to set for 5-10 minutes.

STEP 9.3

Place (2) 11/4” Self-Drilling Stainless Steel

Screws

(F)

into the middle of the top rail

and (2) 1

1/4” self-drilling stainless steel

screws into the upper third of the bottom

rail.

Summary of Contents for PEEPING TOM VF16200






















Search results

Summary of Contents for PEEPING TOM VF16200

Reviews:

Brands by name

Popular brands

WamBam PEEPING TOM VF16200, Assembly Instructions Manual

Search results

Summary of Contents for PEEPING TOM VF16200

Reviews:

Brands by name

Popular brands