WWW.
WAMBAM
FENCE.COM
11
ASSEMBLY
INSTRUCTIONS
VF16200
STEP 2:
LOCATE AND INSTALL
FIRST PIPE ANCHOR
STEP 2.1
Identify the location for the first pipe anchor
positioner. Keep the edge of the anchor posi-
tioner 2” away from any vertical surface to leave
room for the post. If you are using Cap’n Jack
post caps, please place the positioner 4” away
instead of 2” to allow space for the post cap.
Use a post pounder to stabilize the pipe anchor in the anchor
positioner, then pound the pipe anchor into the ground.
Note:
If obstructions exist beneath
the ground, please refer to our
‘Murphy’s Vinyl Fence Laws’ Guide
for further clarification.
Note:
Make sure your
anchor positioner is
level with the ground
and not sloped at an
angle
.
Slide the leveling donut over the
pipe anchor.
2”
STEP 2.2
STEP 2.3
