HANDLE
WITH CARE
1
2
3
4
Felt
tacks
*Felt size: 2150mm
P 4
For assistance please contact customer care on: 01636 880514
Mercia Garden Products Limited,
Sutton On Trent,
Newark,
Nottinghamshire,
NG23 6QN
www.merciagardenproducts.co.uk
Please retain product label and instructions for future reference
Step 6
Fix both eaves frame (
No. 9
) to the
edge of both roof panels (
No. 5
)
taking care to attach the eaves
frames to the edge of the roof panel
that matches their lengths.
Fix the roof sheets to the roof
ensuring they come together at the
top using 10x30mm screws per roof
sheet.
*Ensure to screw the roof sheets
into the framing of the panels and
the ridge bar.
28x30mm screws
Pre drill
hole
30mm
screw
5
8
Step 7
Once the roof has been
fixed in place, secure the
building to the floor using
50mm screws.
*Ensure to screw through the panel
into the floor bearers below using
the nailing pattern as a guide.
18x50mm screws
Pre drill
hole
50mm
screw
b
b
b
b
b
b
b
Step 8
Cut the felt into ine strip and lay
onto the roof as shown in the
illustration.
*Ensure there is approximately
50mm of overhanging felt around
the building.
Fix the felt onto the building using
the felt tacks supplied at 100mm
intervals.
50x Felt Tacks
