Operating instruction and technical description
EV tester type 1 and type 2 - 2.0
©
Walther-Werke Ferdinand Walther GmbH
Seite 2 von 12
Contents
1
Operating instructions EV simulator/tester
2
Safety notes
3
Operating instructions
3.1
General description
3.2
Hardware
3.2.1
C
omponents
3.2.2
Hardware configuration
4
Operation
4.1
Handling
4.2
Features of the EV simulators
4.3
Measuring of built-in resistances inside plug type 2
4.4
Ampacity simulation of resistances inside plug type 2
4.5
Measuring of built-in resistances inside plug type 1
4.6
Checking the PE connection between PWM and vehicle
4.7
Simulation of a fault by means of a switchable fault current
4.8
Simulation of vehicle status B, C, D and display of charging voltage
4.9
Measuring of PWM signal (CP test jack)
5
Troubleshooting
6
Maintenance
6.1
Battery change
7
General technical specifications