Rev. 1.4
Assembly Instructions
– Full-Jet Valve VMS-02
Page 19 of 19
Walther Systemtechnik GmbH
– D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de
10.4.2 Add-on Elements
Needle Sensor
The installation of a sensor for the raster needle is factory-made. It is integrated in the raster needle lock
(pos. 7.0 of spare parts list). As a spare part, the raster needle lock is always delivered as a complete unit,
since the initiator is factory-adjusted and pasted in.
Pos.
Description
1
Raster needle sensor
Pressure sensor
The attachment of a pressure sensor is also factory-made. Its position can optionally be on the side (left /
right) or on top. For additional information please refer to the Operating Manual
“Pressure Sensors 97PA-
21x-xxx
“
.
Pos.
Description
2
Pressure sensor mounted on the left of the pulse valve
3
Pressure sensor mounted on top of the pulse valve
4
Pressure sensor mounted on the right side of the pulse valve
Hotplate
The installation of a heating plate is also factory-made. Its position can optionally be on the left or on the right
side. For further information please refer to the Description
“Heating and Accessories
.
Pos.
Description
5
Hotplate mounted on the left side of the pulse valve
6
Hotplate mounted on the right side of the pulse valve
