C) CLEANING BOOTS.
Cleaning boots are made from a specially engineered polymer. They are composed of
one rigid layer which is very thin and durable, but not very absorbent (does not hold liquid). This may require
additional Surfox-T solution to keep the boot wet during cleaning.
They are used for internal angles or tight corners because they are thinner and reduce the chance of arcing.
Since they wrap around the insert, they avoid short circuits (arcing).
Several shapes and sizes are available:
Cleaning boot:
For large flat internal surfaces or angles.
Part number 54-B 005.
To be used with tungsten insert 48-R 133.
Narrow Cleaning boot:
For narrow flat internal surfaces or angles.
Part number 54-B 007.
To be used with tungsten insert 54-B 017.
Cleaning boot 60º:
For large internal corners or angles.
Part number 54-B 006.
To be used with tungsten insert 54-B 016.
Narrow Cleaning boot 60º:
For narrow internal corners or angles.
Part number 54-B 008.
To be used with tungsten insert 54-B 018.
X - ACCESSORIES
22
Summary of Contents for Surfox 203
Page 1: ...User s Guide 60 C 783EFS ...
