Compact-S Model 350 - Parts Cleaning System
5
Owner’s Manual
Safety Instructions
(...continued)
first aid:
If used cleaning solution is splashed on clothing, change
promptly. Thoroughly wash any body areas that have been in contact
with the solution. Saturated clothing must not remain in contact with
skin.
eye Contact:
Flush with water for 15 minutes, lifting eyelid often. See a
physician if required.
ingestion:
Rinse mouth and drink plenty of water. See a physician if
required.
Please refer to
bio-Circle aero™, bio-Circle l™
and
bio-Circle
ultra™
MSDS No.:
l-78e , l-148e
and
l-161e
for complete safety
data information.
9. This unit is equipped with a 3-conductor power cord and 3-prong
grounding plug. It must be connected to a correspondingly grounded
power outlet protected by a class
a ground fault Circuit interrupter
(
gfCi
) to prevent electric shock hazard. (Trip current < 6 mA)
10. Should you encounter any problems within the first year of purchase,
contact the
bio-CirCle
®
Technical support center. (See page 20)
Introduction
Your
bio-CirCle
®
Parts Cleaning System is precision built to meet the
highest industrial standards. For maximum performance and longest life,
follow the operating instructions and maintenance procedures outlined in
this manual.
This unit is
Csa
certified for both Canada and USA. It is
supplied with a 3-conductor power cord and a 3-prong
grounded plug. It must be connected to a grounded
receptacle protected by a Class a ground fault Circuit
interrupter
(
gfCi
).
Voltage
Before connecting this unit, check that the voltage shown on the rating plate
is the same as that of the power source.
Operating this unit on a voltage other than specified on its rating plate may
result in personal injury to the user and damage to the unit.
Summary of Contents for BIO-CIRCLE COMPACT-S 350
Page 83: ......