SAFETY INSTRUCTIONS
FOR INDUSTRIAL USE ONLY
Before using this unit, read all safety and operating instructions
carefully and save this manual for future reference.
1.
Read this owner's manual to familiarize yourself with the unit’s
operation, its particular features, applications and limitations. Do
not let unqualified personnel use this unit.
2.
Ensure unit is in good condition before each use.
3.
Parts that are damaged or defective should be properly repaired or
replaced by a Walter Surface Technologies. authorized service
center only.
4.
Only use original accessories.
5.
Only use Walter Water Based product with this unit. Follow
safety instructions pertaining to the chemical (see MSDS
and safety instructions on refillable sprayer and refilling station).
6.
Operate unit with admissible pressure only.
7.
Use unit only in a well ventilated area.
8.
Do not bend the conduits.
9.
Connect unit only on an airline equipped with a filter regulator.
10.
When the unit is not in use, disconnect it from the compressed air
supply. Pressurized air and whipping hoses can cause severe
injuries. Before changing accessories, making repairs or when
storing, always shut off the air supply, depressurize hose and
disconnect the unit. Never aim pressurized air at yourself or
anyone else.
11.
Do not abuse the air supply hose. Never pull or carry the unit by
its hose. Keep the hose away from heat and sharp edges. Inspect
the hose periodically. If damaged, have it replaced.
12.
Ensure conduits are empty and unit is purged before storing or
transporting the unit.
13.
CAUTION, Only use Walter products approved for use with this
station.
The use of other products could cause machine
damage/failure which can also cause dangerous fluid leaks.
SPECIFICATIONS
Maximum pressure
150 PSI (10 bar)
Operating pressure
90 - 150 PSI (6 - 10 bar)
Filling capacity per cycle
Approx. 400 ml (13.5 fl oz)
2
