P/N: 058-70006-001
Printed in Taiwan
www.irtec.com
This product may be covered by one or more U.S. patents or patent applications.
Please visit www.irtec.com for more information.
OVERVIEW
The BDS-700 is a low voltage dual-tech wall switch sensor in
the IR-TEC’s WALLSENZR family designed to fit in a NEMA
standard wall box. This state-of-the-art wall switch sensor
combines digital Passive Infrared (PIR) and High Frequency
Doppler (HFD) sensing technologies into an aesthetically
pleasing housing to provide superior occupancy/vacancy
sensing control for various applications. HFD is an advanced
sensing technology which utilizes super high frequency radio
waves to detect the object movement, similar to ultrasonic but
without grid openings on the front.
The sensor output will be activated to turn ON the load as
programmed via the connected power pack or BMS when it
detects the presence of an occupant, and will turn OFF
automatically if no motion is detected before the delay time
elapses. To meet compliance of specific energy code, such as
CA Title 24, the BDS-700 series can be programmed as a
Vacancy Sensor. In vacancy sensing mode, the sensor output
will only be activated by pressing the push-button manually
and will turn OFF the load automatically per the sensor delay
time. The BDS-700 allows for the push-button operation to be
programmed with different manual control modes.
The sensor comes with an ambient light sensor (ALS) to
inhibit the lighting if ambient light level is higher than required.
The Accu-Set digital potentiometers make delay time (TIME)
and ambient light level (LUX) settings fast, easy and accurate.
Isolated dry contact output allows the BDS-700 series to
control the load with IR-TEC Power Packs or integrate with
BMS/BAS.
INSTALLATION NOTES
SPECIFICATIONS
Low Voltage Dual-Tech Wall Switch
INSTALLATION INSTRUCTIONS
BDS-700 Series
Power input
Current drain
Sensing technology
Control output
Contact rating
Detectable speed
Mounting height
Ambient light level
Delay time setting
Op. humidity
Op. temperature
Dimensions
Detection coverage
12~24VDC ± 5%
10/30 mA, 24VDC @vacant/occupied
Digital PIR & High Frequency Doppler
Form A relay (NO), isolated dry contact
Max. 2A @30VDC, isolated
1~10 ft./sec. (0.3~3 m/sec)
3 ~ 5 ft. (90~150 cm) above the floor
Major motion - 30 ft x 40 ft (W x L) @4 ft high
Minor motion - 20 ft x 20 ft (W x L) @4 ft high
7 levels, from dark to 24 Hr. (ALS disabled)
T/1’/3’/5’/10’/20’/30’, T=10 sec. for testing
Max. 95% RH, non-condensate
-40°F ~ 131°F (-40°C ~ 55°C)
4.13”H x 1.77”W x 1.65”D (w/mounting plate)
INDOOR USE ONLY
Utilisation a L'interieur Uniquement
The PIR sensor is more sensitive to the movements
“crossing” the detection zones than “toward” or “away”
it. To obtain better sensitivity, ensure the sensor to have
clear field of view for the occupant’s motion within the
desired detection coverage.
In general, the HFD sensor has better sensitivity to the
minor motions than the PIR sensor. The HFD sensor
could possibly detect the movements out of sight
through non-metallic partition or enclosure. If so,
reduce the HFD sensitivity to prevent unwanted
triggering.
The sensor should be mounted within the specified
mounting height to achieve optimal performance.
Do NOT mount the sensor directly above or nearby a
heat source, or where unintended motion (e.g. hallway
traffic) will be “seen” by the sensor.
1.
2.
3.
4.
Turn power OFF at circuit breaker before installing Power Pack
or Sensors.
Do NOT touch the square window of infrared sensor under the
lens assembly.
WARNING:
Do Not Install To and/or Cover a Junction Box Having Class 1, 3 or
Power and Lighting Circuits
Class 2 Device Wiring Only – Do Not Reclassify and Install as Class 1,
3 or Power and Lighting Wiring
Coupez l'alimentation au disjoncteur avant d'installer Power
Pack ou capteurs.
Ne PAS toucher la fenêtre carrée de capteur infrarouge sous
l'ensemble de l'objectif
AVERTISSEMENT :
Classe 2 Câblage de périphériques Seulement - Ne PAS reclasser et
installer Classe 1, 3 ou alimentation et circuits d'éclairage
WARNING & CAUTION
AVERTISSEMENT & PRUDENCE
DETECTION COVERAGE
40’
Top view
Side view
4’
7’
30’
40’
Minor motion
20’
20’
Major motion
180°, 30 ft x 40 ft (W x L)
