background image

 

 

   

 

 

Revision 5 

Product Manual  
WHBV-101W-LH-NB and WHBV-101W-RH-NB 

 

 

1. Disclaimer 

 

Every effort has been made to supply information within this manual which is correct.  
Wallgate Limited and Galvin Engineering will not be liable for any damage or loss 
that arises if the person installing, operating, or maintaining the unit has not read or 
not complied with the manual.   
  
Wallgate Limited or Galvin Engineering reserves the right to alter, update or improve 
its product specification at any time without prior notice. This manual is specific to the 
product that it has been supplied with at the date of supply.   
  
The product must be installed in accordance with these installation instructions and in 
accordance with AS/NZS 3500, the PCA and your local regulatory requirements. 
Water and/or electrical supply conditions must also comply to the applicable national 
and/or state standards. Failing to comply with these provisions shall void the product 
warranty and may affect the performance of the product. Further installation 
compliance requirements are listed in document 002.90.00.00 – Installation 
Compliance. 
 
No part of this publication and the information contained may be reproduced, 
transmitted, stored in a retrieval system, used or disclosed wholly or partly without 
prior written permission from Wallgate Limited or Galvin Engineering. 
 
Please ensure this manual is passed to the end user.  The manual forms an integral 
part of the product and should be kept for its working life. Additional copies of this 
and other supporting documents are available by contacting Galvin Engineering by 
visiting www.galvinengineering.com.au. 

 
 
 
 
 
 
 
 

Summary of Contents for WHBV-101W-LH-NB




















Reviews: