WX350, WX360
3-point Hitch Wood Splitter
Service and Maintenance
25
8. Service and Maintenance
WARNING!
Risk of serious personal injury. Stop engine
before performing ANY service or maintenance
procedure. Reinstall all covers and guards
removed before putting machine back into
service.
W033
8.1 Maintenance Safety
1.
Follow good shop practices:
• Keep service area clean
and dry.
• Be sure electrical outlets
and tools are properly
grounded.
• Use adequate light for
the job at hand.
2.
Never operate the machine in a closed building.
The exhaust fumes may cause asphyxiation.
3.
Before servicing or repairing, place the machine in
a
Safe Condition
. See
.
4.
Never work under equipment unless it is properly
supported.
5.
When performing any service or maintenance
work always use appropriate personal protective
equipment.
6.
Where replacement parts are necessary, use only
OEM parts to restore your equipment to original
specifications. Wallenstein Equipment is not
responsible for injuries or damages caused by use
of unapproved parts or accessories.
7.
When completing a maintenance or service
function, make sure all safety shields and devices
are installed before placing splitter in service.
8.
When cleaning any parts, do not use gasoline. Use
a cleanser designed for that purpose.
9.
Always use proper tools in good condition. Make
sure you understand how to use them, before
performing any service work.
8.2 Maintenance Schedule
As Required
Check the condition of all hydraulic lines, hoses and
fittings. Replace any that are damaged.
Remove any entangled material from splitter.
Check that all fasteners are tight.
Every 100 hours or Annually
Grease wedge slide on splitter bed.
Clean machine. Remove debris and entangled
material.
00739
Fig. 15 –
Wedge Slide
