7
P202
Step 13
•
Slide the saw adapter plate into the guides on the chain saw
pivot. Make sure the draw latch is open so the saw can
slide in without interference.
01138
Fig. 10 –
Chain Saw Pivot
Step 14
•
Close the draw latch over the catch on the saw / adapter
plate. This tightens the saw to the pivot assembly.
•
Check saw movement through its range of motion and
adjust as required.
NOTE:
Some adjustment may be required to the pivot
base, depending on the saw length.
01139
Fig. 11 –
Draw Latch on Chain Saw Pivot Frame
•
Check the range of motion of the saw. Make sure the bar
cannot contact any part of the machine. Pull the saw off
and adjust the adapter plate position as required.
