BXS Series
3PH Self-feed Chipper
Operating Instructions
31
7.12 Storage
After the season's use or when the machine is not going to be
used for a period, place the chipper in storage.
•
Completely inspect all major systems.
•
Replace or repair any worn or damaged components to
prevent any unnecessary down time at the beginning of the
next season.
IMPORTANT! If the chipper is equipped with the Power
Pack option, refer to the engine owner's manual for storage
preparation.
1.
Remove all dirt, mud, and debris. Inspect all rotating parts
for entangled material.
2.
Wash off machine, then operate it for a few minutes to dry
the inside the machine.
3.
Lift the feed hopper up and lock it there (all models except
BX36S).
4.
Turn chute inward to reduce machine width.
5.
Touch up all paint nicks and scratches to prevent rusting.
6.
It is best to store the machine inside. If that is not possible,
cover with a waterproof tarp.
7.
Store in an area away from human activity.
8.
Do not allow children to play around the stored unit.
01365
Fig. 35 –
Feed hopper stored
Removing from Storage
When removing this machine from storage, follow the
Pre-operation Checks. (See
).
When lowering the feed hopper, be aware of the
pinch point between the hopper and the sub chute.
