7
3652A300 Installation Instructions
8.
Assemble
(3652L308)
Load Rail, LH (9) and
(3652L310)
Lower Spanner (12) to
(3652W300)
Tractor Plate, LH (4).
Use
(Z71530 x3, Z73151 x3, Z73151 x3)
1/2" NC x 3" Lg.
hex head bolts, washers, and lock nuts (17, 21, 19).
Hand tighten only at this time.
17
9
17
21
19
12
21
4
9
9.
Repeat steps 1–8 for the right-hand side. Hand tighten only
until fully assembled.
10.
Torque-tighten all subframe fasteners.
11.
Reattach the anti-sway bars.
12.
Re-install the wheels if removed, and torque lug nuts /
bolts. Refer to tractor owner's manual.
13.
Take the backhoe subframe mount and attach it to the
backhoe on main base bracket. Use the 5/8" NC bolts and
nuts provided — 4 for each left- and right-hand side.
14.
Torque -tighten all the bolts.
Backhoe
Main Base
Bracket
Backhoe Mount
Assembly
The subframe, backhoe mount and backhoe should remain on
the tractor and not be removed. Check that the lift arms move
freely with the subframe installed.
Attaching the Backhoe
15.
Align and reverse the tractor up to the bracket. Get close
enough to attach the hydraulic hoses to the backhoe.
16.
Attach the hydraulic lines from the backhoe to the tractor.
See illustration.
NOTE:
The backhoe is equipped with a
directional control valve and does not
allow reverse flow if pressure and return
lines are connected incorrectly.
Pressure Line
Return Line
WARNING!
When operating the boom and stabilizers, ensure
the area is clear of bystanders and operator is
safely positioned.
17.
Carefully use the dipper arm / stabilizer legs to tilt the
bracket / backhoe on an angle, so that the bottom attach
points line up with the hooks on the bottom of the subframe
on the tractor.
