Operating Instructions
BXC34
Cart Chipper
28
WARNING!
Machine shown with guards removed for
illustrative purposes only. Never operate
machine with guards removed.
W001
9.
If required, rotate the rotor
very carefully
and slowly by
hand to be sure there is nothing jammed between the rotor
and stationary blades.
Do not reach into the rotor housing
if the rotor is moving.
10.
Install and secure rotor cover.
11.
Start the engine. Engage the drive system and make sure
material is cleared before resuming work.
6.14 Storage
After the season's use or when the chipper is not going to be
used for a period, place the machine in storage.
IMPORTANT! Review the engine owner's manual to prepare
the engine for storage.
•
Clear out any debris from the machine.
•
Wash the machine then operate it for few minutes to dry
out the moisture from the inside.
•
If storing for long periods, add fuel stabilizer to the fuel
tank. Run the engine for 2–3 minutes so the stabilizer gets
into the fuel system. Turn fuel valve off. Consult the engine
owner's manual for specific information relating to engine
storage.
•
Thoroughly inspect the chipper. Check condition of the drive
belt and pulley. Replace or repair worn or damaged parts.
•
Store the unit in a dry, level area away from human activity.
Do not let children play on or around the stored machine.
•
If the chipper cannot be stored inside, cover it with a
waterproof tarp.
Removing from Storage
When removing this machine from storage, follow the
Pre-operation Checklist on page 22.
