Controls
BXC34
Cart Chipper
20
5.3 Feed Chute Handholds
To move the chipper, use the handholds on the side of the feed
hopper. The machine is balanced to make it easy to move.
Make sure the chipper is sitting firmly on the ground during
operation.
01185
Fig. 14 –
Feed Chute Handholds
5.4 Drive Engage Handle
The drive engage handle activates the rotor drive system to start
the rotor turning for chipping. A reliable brake / clutch system
controls power from the engine to the rotor.
01186
Fig. 15 –
Drive Engage Handle
Drive Position
To engage the rotor, slowly push the handle down. Spring
tension locks the handle into drive position and the rotor begins
to spin up to speed.
NOTE: Engaging the drive too quickly can stall the engine.
Stop Position
To stop the rotor, pull the handle up. Spring tension locks the
handle into the STOP position. The rotor will then stop moving
within 5 seconds.
IMPORTANT! Be aware once the rotor is disengaged, the
clutch brake automatically engages.
