Wallbox QUASAR, User Manual, Page: 24 / 41

24
CONNECTIVITY
Our chargers have three internet connection methods that
you can configure:
• Wi-Fi
• Ethernet
• 3G/4G with dongle and mobile SIM card
V2G
The Vehicle to Grid(V2G) feature can be configured through the Installation Options screen in the
Configuration menu of the my Wallbox app. By selecting the applicable normative settings on the Grid
Codes screen, the V2G feature can be enabled.
Before applying changes to these settings, check the local regulations and the electricity
supplier requirements regarding to vehicle to grid, vehicle to business and vehicle to home
features. Wrong settings may cause problems, disruptions and equipment damage to the
electrical system and to the distribution network. Wrong use may be subject to fines.
Wi-Fi
The charger's Wi-Fi connection can be activated or
deactivated. Once activated, the list of available networks will
appear, when you click on one of them you will be connected
to the network or, if it is protected, it will ask you to enter the
password.
To see further information on the network once connected,
click the icon.
Ethernet
It is possible to configure the IP
addresses and DNS configuration of
Ethernet connections on the following
screen.
3G/4G
The charger's 3G/4G connection can
be activated or deactivated. Once
activated, it is possible to configure the
3G/4G connection data configuration
through the following screen.
Wallbox App
i