Wallbe LEO Installation Manual Download

Page: 4 / 16

Driving eMobility

4/16

Installation Manual

2 SAFETY

2.1 Safety instructions

Improper use and non-compliance with the operating
manual may jeopardize:

• your life

• your health

• charging system and vehicle.

Safety devices on the charging system

• must not be removed,

• must not be manipulated,

• must not be bypassed,

• before each use, it must be checked that the equip-

ment (e.g. housing, connecting line, charging coupler)
is undamaged,

• must be repaired or replaced as necessary, in order

to preserve the functional properties.

Ensure that:

• safety identifications, e.g. yellow-colored marks,

• danger signs and

• safety lights

remain easily visible and retain their effectiveness.

• When operating the charging system, do not use

any extension cables, cable reels, multisocket power
strips, or travel adapters.

• Do not insert any objects into the charging coupler of

the charging system.

• Protect the socket-outlets and plug-in connections

against moisture and water or other liquids.

• Never immerse the charging system or the charging

coupler in water or other liquids.

• Do not disconnect the charging coupler from th ve-

hicle during charging.

wallbe® takes responsibility only of the charging sys-
tem in its delivered condition and for any work perfor-
med by skilled wallbe® personnel.

Notes for people with a pacemaker (PM) or implanta-
ble cardioverter defibrillator (ICD)

Charging systems from wallbe® that are operated as
intended, comply with the European guideline on elec-
tromagnetic compatibility regarding radiated interfe-
rence.

Should people with a pacemaker (PM) or implantable
cardioverter defibrillator (ICD) wish to conduct activities
on charging systems and their devices in the inten-
ded manner, wallbe® is not in a position to make any
statement regarding the suitability of such medial de-
vices. wallbe® is not able to assess the pacemakers or
concerned implantable cardioverter defibrillators with
regard to their susceptibility to electromagnetic radia-
tion. This is something that only the manufacturers of
the pacemaker or implantable cardioverter defibrillator
can do.

wallbe® therefore recommends only allowing the peo-
ple in question to work on its charging systems after
consultation with the manufacturer of the pacemaker/
defibrillator and the relevant insurance company. En-
sure at all times that no health or safety risks are in-
volved.

Note

: People with a pacemaker or defibrillator may not

work on or stand near the charging systems and their
devices, e.g. to perform maintenance operations or
rectify any faults.

Working on the charging system without risk

Before plugging the charging coupler into the vehicle

• The connecting line of the charging system must be

completely unwound.

• Check whether the housing of the charging system,

the connecting line, the charging coupler, and the
connectors are undamaged.

• Take hold of the plug-in connection of the charging

system only on the charging coupler and not on the
charging cable.

• Ensure that no-one can trip e.g. over the charging