![background image](http://html2.mh-extra.com/html/wallas/spartan/spartan_manual_3235446028.webp)
- 27 -
Select thermo control mode
from the top menu.
Rotate to set the orange
selection square around the
start icon and select.
Confirm selection with long
press on top of panel. (long
press is for child safety)
Device is started and
starting
indication text is shown.
Device is stopped by selecting
Start/stop icon again and long
press.
(Pressing select button more
than 6 seconds will stop the
heater )
After few minutes heater is
ignited and flame indicator is
shown.
Heater will start increasing
power.
Scroll the selection square
around the temperature target
and press the button.
When temp selection is active
and you can change temperature
target setting by rotating the
Control Ring.
Settings:
Settings menu
- you can scroll and select the row.
For example, select " Temp
Sensor".
Temp sensor
-wired is sensor hardwired to
heater unit.
- wireless sensors are listed by
sensor address.
-when wireless sensor is
selected it gets running number
ID.
Device Info
- shows you heater software
versions.
Device Stats
- shows you heater statistics.
- heater voltage
- last error message