- 15 -
Side lead-through 2467
A side lead-through is installed in the side of the boat or in the transom. In sailboats it is recommended to install it in the
transom. The installation always requires a so-called goose neck. Make the necessary installation cut-outs and spread
a suitable sealing agent on both sides of the seal and on the screw holes. This will ensure that the connection is
waterproof.
The 1028 exhaust gas pipe must be 30-50 mm (1 3/16" - 1 31/32") longer than the 2045 inlet pipe. This way the
exhaust gas pipe will stay in place in the lead-through more firmly. The measurement depends on the overall length of
the piping.
2467 package contents
1 pcs
Side lead-through
1 pcs
Accessory bag 17679
4 pcs
Fastening screw M5 x 40 mm
4 pcs
Nut M5
4 pcs
Washer 5,3 x 10 mm
1 pcs
Hose clamp 32 - 50 mm
1 pcs
Gasket