wallas Spartan, Technical Information

Page: 18 / 43

Spartan
- 17 -
Closable lead-through 2460
The cap of the closable lead-through must be detached for installation and seal maintenance by pressing the spring
indicated by the arrow in with, for instance, a screwdriver. Take care not to let the screwdriver slip as the spring is very
stiff. Hold the cap with your other hand when pressing in the spring. When the spring is down, pull the cap gently out of
the frame. When assembling the lead-through, ensure that the order of the parts is correct. Also make sure that the
spring goes in the correct hole in the cap. Otherwise, the lead-through cannot be closed.
Maintenance
To keep the seals from hardening, lubricate them yearly with a heat-resistant petroleum jelly.
Check that closeable fitting is open before starting the device.
2460
1 pcs Closable lead-through