![background image](http://html1.mh-extra.com/html/wallas/2000t/2000t_technical-information_3227738023.webp)
- 89 -
1
2
8
3
9
5
7
6
4
~ 20 °C
(~ 68 °F)
1. ~ 5 °C (~ 41 °F)
2. ~ 11 °C (~ 52 °F)
3. ~ 17 °C (~ 63 °F)
4. ~ 23 °C (~ 73 °F)
5. ~ 29 °C (~ 84 °F)
6. ~ 35 °C (~ 95 °F)
en
Using the unit
Ignition
The start-up process and heating is automatic.
The heater will ignite when the heating switch (3) is pressed continuously for more
than 2 seconds. A yellow heating indicator will light, indicating that the heating is
on.
A red combustion indicator light (1) will be lit when the burner flame has been ig
-
nited and the combustion has stabilised after about five minutes after the ignition.
The whole process takes about five minutes.
First ignition
After the installation or maintenance the heater may not start at the first attempt , if
the fuel line is empty.
Turn off the heater. The heater is shut down by pressing the heating switch (3)
continuously for more than 2 seconds.
Switch the heater on again.
1.
Combustion indicator
2.
Temperature adjustment / Power control
3.
Heating switch
4.
Power indicator
5.
Thermostat indicator
6.
Thermostat sensor
7.
Ventilation switch
8.
Ventilation indicator
9.
Heating indicator
2
0
00t
Operation
D10431
490603