WALKY WL1024, Instructions And Warnings For Installation And Use

Page: 14 / 112

EN
12 – English
EC DECLARATION OF CONFORMITY
Note - The contents of this declaration correspond to the declarations contained in the latest available revision, prior to printing of this manual, of the official document on file at
the headquarters of Nice S.p.a. This text was readapted for editorial purposes.
Number: 322/WL.. Revision: 0
The undersigned Luigi Paro, as Managing Director, declares on his own responsibility that the product:
Name of manufacturer : NICE s.p.a.
Address : Via Pezza Alta 13, Z.I. Rustignè, 31046 - Oderzo (TV) Italy
Type: Electric gearmotor
Models: WL1024C, WL1024
Accessories: OXI, OVBT, OVBTGSM, SYKCE, PS424
are compliant with the provisions of the following EC directives:
• 98/37/CE (89/392/EEC amended) DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 22 June 1998 concerning stan-
dardization of the legislation of member states on machinery
As envisaged in directive 98/37/EC, please note that the commissioning of the above product is not permitted until the machine in which the product is
installed has been identified and declared as conforming to directive 98/37/EC.
The product is also compliant with the provisions of the following EC directives, as amended by Directive 93/68/EEC of the council of 22 July 1993:
• 2006/95/EEC (ex-directive 73/23/EC) DIRECTIVE 2006/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 12 December 2006 con-
cerning standardization of member states on electrical material to be used within certain voltage limits
In accordance with the following harmonized standards:
EN 60335-1:1994+A11:1995+A1:1996+A12:1996+A13:1998+A14:1998+A15:2000+A2:2000+A16:2001
• 2004/108/EEC (ex-directive 89/336/EEC) DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004
concerning standardization of the legislation of member states on electromagnetic compatibility and which repeals 89/336/EEC
In accordance with the following harmonized standards: EN 61000-6-2:2005; EN 61000-6-3:2007
It is also compliant - limited to the applicable parts - with the following standards:
EN 60335-1:2002+A1:2004+A11:2004+A12:2006+ A2:2006, EN 60335-2-103:2003,
EN 13241-1:2003; EN 12453:2002; EN 12445:2002; EN 12978:2003
Oderzo, 29 May 2009 Luigi Paro (Managing Director)
Example of life span calculation for a Walky with full length arm gearmo-
tor (please refer to Table 14 and Graph A):
- weight of leaf: 100 kg; - length
of leaf = 1.7 m (strenuousness index: 55%); - no other straining elements pres-
ent; Total strenuousness index = 55%; Estimated life span = 55.000 manoeuvre
cycles
Product life span
The product life span is its average commercial life. The value of the product life
span is strongly affected by the strenuousness index of the manoeuvres per-
formed by the automation system: i.e. the sum of all the factors which con-
tribute to the product wear (see Table 14).
To determine the probable life span of your automation system, proceed as fol-
lows:
01. Calculate the strenuousness index by adding together the percentage val-
ues of the items in Table 14 ;
02. In Graph A trace a vertical line from the value as just calculated until it inter-
sects the curve; from this point, trace a horizontal line until it intersects the line
of the “manoeuvre cycles”. The value determined is the estimated life span of
your product.
The life span estimate is based on design calculations and on the results of
tests performed on prototypes. Indeed, since it is an estimate, it is in no way a
guarantee as to the actual duration of the product.
GRAPH A
manoeuvr
e cycles
strenuousness index %
TABLE 14
Strenuousness index
STANDARD LENGTH ARM SHORTENED ARM
< 1,2 m
1,2 - 1,6 m
> 1,6 m
Length of leaf Weight of leaf
Room temperature above 40°C or below 0°C or humidity above 80%
Blind leaf
Installation in windy area
> 100 kg
< 100 kg
> 80 kg
< 80 kg
> 60 kg
< 60 kg
55%
30%
55%
40%
55%
40%
15%
15%
15%
65%
50%
65%
50%
-
-
15%
10%
10%