For the most up-to-date assistance, please scan this
QR Code to download the full User Manual before
using this product.
3 Download user manual
.
Stay Connected
@walkntalk_
walkntalk.com.au
@walkntalkau
1b. Install for Air Vent usage
Find a suitable air vent in your vehicle where you can
attach the Vent Mount that won’t obstruct your
visibility of the road.
Rotate the knurled body of the Vent Mount to extend
the securing hook. Latch the securing hook over a
vane in your chosen air vent. Rotate the knurled knob
in the opposite direction to withdraw the securing
hook until the Vent Mount is secured in position.
2. Finish the installation
Unscrew the ring from the back of the magnetic
phone holder. Push the ball on your chosen (dash or
vent) mount through the ring and into the concave
connector on the back of the magnetic phone holder.
Tighten the ring to the desired position.
Attach the Metal Ring Sticker
Remove the 3M adhesive backing and attach the metal
ring sticker to the outside of your phone case - or
directly on the back of your
phone if you don’t use a case.
If your phone supports wireless
charging, make sure to centre
the metal ring sticker on your
phone so it doesn’t interfere
with wireless charging.
Note for iPhone users: If you’re
using a MagSafe compatible
phone case, then you’re good to
go and won’t need to use the
metal ring sticker.
iPhone and MagSafe are trademarks of Apple Inc., registered in the U.S. and other countries
and regions.
Back
